Wrench-first guides on compounds, fitment, bedding and brake upgrades — written for enthusiasts, not search engines.
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-13 Street pads trade ultimate heat tolerance for cold bite, low noise and low dust; track pads trade those manners for fade resistance. VINIC Street holds μ 0.40–0.46 up…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-13 A soft pedal after a brake upgrade is almost always air in the system. Six-piston calipers have two bleed screws each — bleed outboard then inboard, furthest wheel…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-10 Regen handles daily slowing, but your Model 3 still needs friction brakes for emergency stops, holds, and every track session — and light use makes factory discs rust.…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-10 A seven-seat Alphard at full load overwhelms its factory brakes on long descents and repeated stops. VINIC builds two bolt-on front kits for it — the SV61-003T 345mm…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-07 DOT 4 suits street cars; DOT 5.1 suits track use. Under FMVSS 116, DOT 4 fluid must boil at no less than 230°C dry, while fluid labeled “DOT…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-07 Measure wheel clearance for a big brake kit with three numbers: caliper-to-spoke gap, caliper-to-barrel gap, and spoke profile at the caliper’s widest point. VINIC confirms all three free,…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-03 Yes — braided stainless brake lines are worth it on most cars: they remove hose swell for a firmer, more consistent pedal and outlast factory rubber. Every VINIC…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-08-03 Slotted rotors suit most street and track cars — they clear pad debris and gas without weakening the disc. Drilled rotors shed heat slightly faster, but the holes…
By Nana, Sales Operations Manager at VINIC Brakes · Last Updated: 2026-07-30 High initial bite means the pad grips hard the instant you touch the brake pedal. For track driving, look for a compound rated μ 0.42–0.50 with a wide…
The steering wheel starts shimmying somewhere above 60 mph every time you touch the brake pedal. There is a groan underneath it — a low, cyclical drone that matches the shake. That is high-speed brake judder, and it does not…
